MRM procom

MRM procom

PSR-1/PSR-3

	32 Bit RISC floating point microprocessor.
	Response time 60mSec.
	Fast Fourier Transformation to eliminate Harmonics & Surges/Sag.
	High performance & Accuracy.
	Simultaneous display of all measured quantity.
	Password protection for user programmable parameters.

	Download Catalog

SER-1P

	32 Bit RISC floating point microprocessor.
	Response time 60mSec.
	Fast Fourier Transformation to eliminate Harmonics & Surges/Sag.
	High performance & Accuracy.
	Simultaneous display of all measured quantity.
	Password protection for user programmable parameters.Password protection for user programmable parameters.

	Download Catalog

ECON-A

Operation Mode	Auto/Manual/Semi-auto/Auto-stop mode.
Mains Measurement	Single/Three phase voltage, Load Current, Frequency, PF, KW & KVA per phase & total.
DG Measurement	Single/Three phase voltage, Load Current, Frequency, PF,KW,KWh & KVA per phase & total, Battery voltage etc.
Engine Measurement	Lube oil pressure, Water Temperature, Fuel level, Oil Temperature, RPM.
Protection	Under/Over voltage, Under/Over Frequency, Current Unbalance, Overload, RWL, LLOP, HWT, Low fuel, Charging Alternator/V -belt, Emergency off, Service due, Fail to Start/Stop.
Advance Feature	Event Recording, Start/Stop Recording, Interfacing with GSM/SNMP modem. Automatic real time based DG Start and Stop
	7 digital input. 4 Analog input (sensor measurement). 9 outputs (five fixed and three programmable) and one for charging Alternator.
	Download Catalog

DGC-6D

Operation Mode	Auto / Manual mode of operation.
Mains Measurement	Single/Three phase voltage, Load Current, Frequency, PF, KW & KVA per phase & total.
DG Measurement	Single/Three phase voltage, Load Current, Frequency, PF,KW,KWh & KVA per phase & total, Battery voltage etc.
Engine Measurement	Lube oil pressure, Water Temperature, Fuel level, Oil Temperature, RPM.
Protection	Under/Over voltage, Under/Over Frequency, Current Unbalance, Overload, RWL, LLOP, HWT, Low fuel, Charging Alternator/V -belt, Emergency off, Service due, Fail to Start/Stop.
Advance Feature	Event Recording, Start/Stop Recording, Interfacing with GSM/SNMP modem. Automatic real time based DG Start and Stop
	7 digital input. 4 Analog input (sensor measurement). 5 fixed outputs .
	Download Catalog

ECON-ABT

Operation Mode	Auto/Manual/Semi auto/Test mode
Mains Measurements	Single/Three phase voltage, Load Current, Frequency, PF, KW, KVA, KVAR, KWH, KVAH.
DG Measurements	Single/Three phase voltage, Load Current, Frequency. PF, KW, KVA,KVAR, KWH, KVAH . Battery Voltage , Run Hour , Service Due Hour, BTS Voltage, Room temperature.
Engine Measurement	Lube oil pressure, Water Temperature, Fuel level ( Both in percentage and Litre), RPM.
Protection	Under/Over voltage, Under/Over Frequency, Current Unbalance, Overload, RWL, LLOP, HWT, Low fuel, Charging Alternator/V -belt, Emergency off, Service due, Fail to Start, Fail to Stop.
Advance Feature	13 digital input. 3 Analog input (sensor measurement). 9 outputs (five fixed and three programmable) and one for charging Alternator.
	Programmable crank cut of method based on either voltage built up or oil pressure build up & voltage built up.
	Download Catalog

EMC-01

Generator Measurements	1 Phase Voltage, 1 Phase Current, Frequency, Battery Voltage, RPM, Run Hour
Protection / Supervision DG	Under/Over Voltage, Under/Over Frequency, Overload, LLOP, Low Fuel, Canopy Temperature, Emergency off, Fail To Start, Fail To Stop
Display / Front Panel	16x2 LCD Display for ease of readout. Parameters are displayed in English along with symbolic representation. Normally the display auto scrolls and displays a parameter for 10 seconds
Dimensions	97.8 х 97.8 x 65 mm
	Fan Current monitoring for canopy fan
	Plug in connectors for error free replacement
	True RMS measurement of all measured parameters with 1% accuracy of measured value
	Download Catalog

EMC-02

Protection	Under Voltage, Over Voltage, Under, Under Frequency, Over Frequency, Over Load.
Measurement	DG Voltage, Mains Voltage, DG Frequency, Load Current ( Single Phase), Runhour, Service Due Hour, Battery Volatge, Fuel Level.
Benefits	IP-65 Protection From Front, Integrates engine gauges and AC metering into one unit, Dual Line Lcd Display For Easy Operation, Compact Design With Minimal Wiring.
Digital Inputs	Low Oil Pressure, HET, Canopy Temperature, Low Fuel
Digital Outputs	Solenoid Pull To Start, Solenoid Pull To Stop, Crank, Hooter, MCB, GCB.


	Download Catalog

ECON-M

Measurement	Generator Measurements - 1/3 Phase voltage, 1/3 Phase current , Frequency , PF, KW, KVA, KWH, Battery voltage, Water temperature, Oil pressure , Fuel level , RPM , Run hour , Service due hour , Oil temperature.
Protection	Under/Over voltage, Under/Over frequency, Current Unbalance, Oil pressure, Oil level, Oil temperature, HWT, RWL, Emergency, Low fuel, Charging Alternator/V-Belt fail, Run hour, Overload
Digital Input	RWL switch, LLOP switch, Fuel switch, HWT switch, Oil level switch, Canopy temperature switch, Oil temperature switch, Earth fault
Analog Input	Fuel sensor, LLOP sensor, HWT sensor, Oil temperature sensor.
Digital output	Crank, Solenoid, Hooter, Charging Alternator, Heater choke, Fuel pump, Pull Solenoid.
Fault data recordin	Last 64 fault with date and time stampin
Password protectio	Three digit password protection for system settings
	Download Catalog

DES-11

Measurement	Generator Measurements - 1/3 Phase voltage, 1/3 Phase current , Frequency , PF, KW, KWH, Battery voltage, Water temperature, Oil pressure , Fuel level , RPM , Run hour , Service due hour.
Protection	Under/Over voltage, Under/Over frequency, Oil pressure, HWT, RWL, Emergency, Low fuel, Charging Alternator/V-Belt fail, Run hour, Overload.
Digital Input	RWL switch, LLOP switch, Fuel switch, HWT switch.
Analog Input	Fuel sensor, LLOP sensor, HWT sensor.
Digital output	Crank, Solenoid, Hooter, Charging alternator.
Timers	Generator voltage/over speed/over voltage supervision timer .
Display	DES-11 equipped with LCD display .
	Download Catalog

MCP-AS

Measurement	1/3 Phase voltage, 1/3 Phase current , Frequency , PF, KW, KWH, Battery voltage, High water temperature, Oil pressure , Fuel level , RPM , Run hour , Service due hour.
Protection	Under/Over voltage, Under/Over frequency, Oil pressure, HWT, RWL, Emergency, Low fuel, Charging Alternator/V-Belt fail, Run hour, Overload.
Digital Input	Remote start, Remote stop, RWL / Canopy temperature switch.
Analog Input	Fuel sensor, LLOP sensor, HWT sensor.
Digital output	Crank, Solenoid, Hooter, Charging Alternator.
Timers	Generator voltage/over speed/over voltage supervision timer .
Display	MCP-AS equipped with LCD display .
	Download Catalog

COP-V

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC) .
	Digital fast Fourier transformation.
	Selectable display of voltage in primary or secondary value .
	Two digital inputs for external reset and external blocking.
	One common trip contact.
	Three programmable alarm contac.
	Selectable auto / manual scroll of measuremen.
	Download Catalog

COP-IE

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC) .
	Digital fast Fourier transformation.
	Selectable display of current in primary or secondary value .
	Two digital inputs for external reset and external blocking.
	One common trip contact .
	Three programmable alarm contact.
	Selectable auto / manual scroll of measuremen.
	Download Catalog

COP-I

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC).
	Digital fast Fourier transformation.
	Selectable display of current in primary or secondary value.
	Two digital inputs for external reset and external blocking.
	One common trip contact .
	Three programmable alarm contact.
	Selectable auto / manual scroll of measuremen.
	Download Catalog

COP-E

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC).
	Digital fast Fourier transformation.
	Selectable display of current in primary or secondary value.
	Two digital inputs for external reset and external blocking.
	One common trip contact .
	Three programmable alarm contact.
	Selectable auto / manual scroll of measuremen.
	Download Catalog

COP-ER

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC)
	Digital fast Fourier transformation.
	Selectable display of current in primary or secondary value
	Two digital inputs for external reset and external blocking.
	One common trip contact. Selectable auto / manual scroll of measuremen
	Contact : 1 trip, 3 programmable.
	Three programmable alarm contact
	Download Catalog

COP-F

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC.
	Digital fast Fourier transformation.
	Two digital inputs for external reset and external blockin.
	One common trip contact
	Three programmable alarm contact
	Contact : 1 trip, 3 programmable.
	Selectable auto / manual scroll of measuremen
	Download Catalog

COP-P

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC/DC Or 8-35 VDC).
	Digital fast Fourier transformation.
	Selectable display of current in primary or secondary value .
	Two digital inputs for external reset and external blocking.
	One common trip contact.
	Three programmable alarm contact.
	Selectable auto / manual scroll of measurement .
	Download Catalog

COP-VF

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC Or 50-400 VDC)
	Digital fast Fourier transformation.
	Selectable display of voltage in primary or secondary value .
	Two digital inputs for external reset and external blocking.
	One common trip contact.
	Three programmable alarm contact.
	Selectable auto / manual scroll of measurement.
	Download Catalog

CBP-1

	(LTD) over current protection with long time delay setting with independent timer
	(STD) short circuit protection with long time delay setting with independent timer
	Ground fault protection with independent timer
	fault protection
	CBP-1 unit can be installed on 3-pole with external neutral or 4-pole circuit breakers
	If instantaneous Follow I2T Time Characteristics For Ltd Protection Last tripping Fault is stored which can be views on by connecting 5VDC voltage on USB port

	Download Catalog

COP-VFI

	Wide range SMPS auxiliary supply (supply range from 50 to 300 VAC Or 50-400 VDC) .
	Digital fast Fourier transformation.
	Selectable display of current and voltage in primary or secondary value .
	Two digital inputs for external reset and external blocking.
	Three programmable alarm contact.
	Selectable auto / manual scroll of measurement.
	One common trip contact.
	Download Catalog

COP PLUS

	128x64 pixel graphical /display event recording.
	Fault date recording , RTC stamp on fault & event.
	Three/five digital Input , site selectable 1A/5A CT secondary current.
	Wide auxiliary supply(20 T o 300 VDC/50-300V AC).
	display in primary/secondary values.
	Wide setting sange with fine setting steps front USB por.
	RS-485 communication port with MODBUS protocol , self supervision.
	Download Catalog

Auxillary & Tripping rely

	Lookout /Triping relay , Auxiliary Relays.
	Mechanical Flag Indicator.
	Voltage Rating 24/110/220 VDC.
	Contact Configuration : 4NO+1NC, 3NO+2NC & 2NO+3NC.
	Self or hand reset contacts , Protective transparent cover for the element.
	Electromechanical design , Screw terminals.
	Compact flush mounting case.
	Download Catalog

ACE SERIES

	Simultaneous Display of Measured Quantity & Parameter.
	Trip Function enables user to have record of integration qty. from a selected time.
	Auto scaling of Kilo Giga, Mega and decimal Point.
	Password protection for user programmable parameters. ï¿½ Selectable auto & manual scroll of display.
	Modbus Communication on RS - 485 (Optional).
	Meter / Wiring configuration is field programmable as Star/ Delta/ Single Phase connection.
	Accuracy Class 1.0 IEC 62053 - 21/ (Optional 0.5;0.2 IEC 62053-22).
	Download Catalog

FLY SERIES

	Trip Function enables user to have record of integration qty. from a selected time.
	Auto scaling of Kilo Giga, Mega and decimal Point.
	Password protection for user programmable parameters.
	Modbus Communication on RS-485 (Optional).
	Meter / Wiring configuration is field programmable as Star/ Delta/ Single Phase connection.
	Accuracy Class 1.0 IEC 62053 - 21/ (Optional 0.5;0.2 IEC 62053-22).
	Selectable auto & manual scroll of display.
	Download Catalog

TNY Series

	TNY series meters are compact digital power meter, equipped with customized 4 digit, 3 row alphanumeric display. Three navigator keys & alphanumeric digits simplifies Display & configuration of meter. TNY series are available with accuracy class of 1.0 IEC 62053-21/(Optational 0.5,0.2 IEC- 62053-22) Modbus Communication On RS 485 or RS232.
	Simultaneous Display of Measured Quantity & Parameter
	Trip Function enables user to have record of integration qty. from a selected time
	Auto scaling of Kilo Giga, Mega and decimal Point .Password protection for user programmable parameters
	Modbus Communication on RS - 485 or RS232Meter / Wiring configuration is field programmable as Three Phase
	Accuracy Class 1.0 IEC 62053 - 21/ (Optional 0.5;0.2 IEC 62053-22) - Selectable auto & manual scroll of display
	18 LEDs (9 in each column) near display , Poly carbonate body , IP 65 from front
	Download Catalog

ACE-DCP Series

	Micro-cotroller Based Design With SMD Technology
	Auxiliary SMPS supply with input range 35-300V AC/DC.
	Password protection for user programmable parameters.
	Programmable Fail Safe & Non Fail Safe Mode.
	Programmable Trip Time Delay & Reset Time Delay
	Trip Indication For Over / Under Voltage faults in the front panel.
	Seperate SPDT Relay for over voltage & under voltage. (5A Resistive Contacts)
	Download Catalog

REX SERIES

	Simultaneous Display of Measured Quantity & Parameter.
	Multi color LED(Red,Yellow,Blue) for indication of types of lines on display.
	Auto scaling of Kilo Giga, Mega and decimal Point, Poly carbonate body, • IP 65 from front.
	Password protection for user programmable parameters.
	Modbus Communication on RS - 485
	Meter / Wiring configuration is field programmable as Three Phase / Single Phase connection.
	Accuracy Class 1.0 IEC 62053 - 21/ (Optional 0.5;0.2 IEC 62053-22), Selectable auto & manual scroll of display.
	Download Catalog

GEM SERIES (Multifunction Panel Meter)

	True RMS Measurement.
	High glow display for distant viewing.
	Auto decimal & kilo select.
	Programmable 1A/5A site selectable.
	Accuracy class 1.0 of reading.
	Programmable PT & CT ration.
	SMPS based Aux. Supply.
	Download Catalog

GEM-DC SERIES (Single Phase Panel Meter)

	True RMS Measurement.
	High glow display for distant viewing.
	Auto decimal & kilo select.
	Programmable 1A/5A site selectable.
	Accuracy class 1.0 of reading.
	Programmable PT & CT ration.
	SMPS based Aux. Supply.
	Download Catalog

E-GEM SERIES (Panel Meter)

	True RMS Measurement
	Accuracy Class 1.0 Of Reading
	High Glow Display For Distant Viewing
	Programmable CT Ratio
	Programmable 1A/5A Site Selectable


	Download Catalog

Prepaid Meter

DG Phase Selection	Te Meter can be programmed to select any combination of the phases of auxiliary supply to be provided to the customer to facilitate the load management of DG.
Load Survey	ProMeter records the daily consumption records of last 6 months for both supplies. Data can be read from the ProMeter using RS485 communication. Data can be read in blocks of 15 days. 12 blocks are available for load survey of 18 days. Te load survey is always read as FIFO bufer.
Maintenance Charge	Apart from normal energy consumption charges some amount may be deducted as standing charges. Te maintenance charge can be set into the meter through communication. Te standing charges can be programmed to deduct daily, weekly or monthly. Te time, day and date for the deduction of standing charges can be changed.
Recharge History	ProMeter keeps a record for last 12 recharges. Te date and time of the recharge along with the amount of recharge is recorded in the meter itself. This data can be read from the meter using 485 communication.
Deliverable	Pro-meter phase prepaid energy meter .
	Pro-meter ins truction manual This is in Documents.
	Atom home display unit for Pro-meter .
	Download Catalog

CMCT

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.

	We will provide you a CT having a secondary current of 1 AMP.
	Fast fourier transformation to extract fundamental components of current and voltage to avoid spurious tripping
	10% glass filled polycarbonate or Nylon housing, flame retardant grades classified UL 94-V2 .
	2 Connection on each side . M4 screws with self lifting clamp strap assembly.
	Download Catalog

PRO-seriese

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	We will provide you a CT having a secondary current of 1 AMP.
	Fast fourier transformation to extract fundamental components of current and voltage to avoid spurious tripping
	10% glass filled polycarbonate or Nylon housing, flame retardant grades classified UL 94-V2 .
	2 Connection on each side . M4 screws with self lifting clamp strap assembly.
	Download Catalog

Ring Type CMCT without wire

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	We will provide you a CT having a secondary current of 1 AMP.
	We make a CT 50/5 TO 5000/5 ,50/5 to 75/5 is in class 5 with ID 31mm and 5VA
	Upto 100/5 we make a CT in class 1 or class .5 with different ID and VA.
	We will provide you a CT having a secondary current of 1 AMP
	Download Catalog

CMCT - Ring Type with wire

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	We will provide you a CT having a secondary current of 1 AMP.
	We make a CT 50/5 TO 5000/5 ,50/5 to 75/5 is in class 5 with ID 31mm and 5VA.
	Upto 100/5 we make a CT in class 1 or class .5 with different ID and VA.
	We will provide you a CT having a secondary current of 1 AMP.
	Download Catalog

Resin Cast CT - Rectangular Type

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	This type is usefull to use in class 1 because in ring type CT not possible to make it in class 1
	Range 100/5A to 6000/5A With different ID and VA Is it in ring type or rectangular type both
	In this class we will make PS CLASS 5P10 5P15
	Range 5/5A up to 100/5A
	Download Catalog

Resin Cast CT - Ring Type

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	This type is usefull to use in class 1 because in ring type CT not possible to make it in class 1.
	Range 100/5A to 6000/5A With different ID and VA Is it in ring type or rectangular type both.
	In this class we will make PS CLASS 5P10 5P15.
	Range 5/5A up to 100/5A.
	Download Catalog

Resin Cast CT - Rectangular Type

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	This type is usefull to use in class 1 because in ring type CT not possible to make it in class 1.
	Range 100/5A to 6000/5A With different ID and VA Is it in ring type or rectangular type both
	In this class we will make PS CLASS 5P10 5P15.
	Range 5/5A up to 100/5A.
	Download Catalog

Resin Cast Ct - Wound Primary

	According to Size, Window, Ratio, Accuracy class and VA Burden, there are 2000 possible combinations for 5A and same for 1A secondary.
	Eight Case sizes in PRO CT series According to Size, Window, Ratio, Accuracy class and VA Burden, there are 300 combinations in PROCT for 5A and same for 1A secondary.
	Various model are available to suits different mounting &busbar arrangement.
	This type is usefull to use in class 1 because in ring type CT not possible to make it in class 1.
	Range 100/5A to 6000/5A With different ID and VA Is it in ring type or rectangular type both
	In this class we will make PS CLASS 5P10 5P15.
	Range 5/5A up to 100/5A.
	Download Catalog

AMF Panels AMF Panel

	PROCOM provides all the shelf solution for simple manual control panel & typical AMF control panel.






	Download Catalog

DGS & D 1Ph AMF Panels








	Download Catalog

MCP Panels

	PROCOM provides all the shelf solution for simple manual control panel & typical AMF control panel.






	Download Catalog

MCP Panels

	PROCOM provides all the shelf solution for simple manual control panel & typical AMF control panel.






	Download Catalog

MCP Panels

	PROCOM provides all the shelf solution for simple manual control panel & typical AMF control panel.






	Download Catalog

Busbar Conical

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Busbar Hexagonal

	Resistance against corrosion
	High tensile strength
	Perfect finish
	Sturdy construction
	Durable and easy to install
	Long lasting nature
	Tough construction and Rust-proof
	Download Catalog

Busbar L-type

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

PRO-VBS

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

One-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Two-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Three-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Four-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Five-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Six-way finger support

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Single pole power terminal

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

Multi pole power terminal

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

DMC PAD

	Universal versatile supports.
	Minimum space requirement.
	High resistance to short circuit forces
	Excellent security of equipment
	Universal fixing
	Working temperature: -40oc up to 130oc
	Standard or customised supports
	Download Catalog

3 Chanel

	Voltage : 12/24 VDC , 230 V AC.
	Contact : 1CO/2CO.
	Protection : Freewheeling Diode Across relay .
	Indication : Red LED.
	Mounting : Din 35 Carrier Rail.
	Free Wheeling diode across coil for protection.
	Jumper are provided for selection between positive / nagetive looping.
	Download Catalog

4 chanel Relay Card

	PROCOM Manufactured wide range of Relay Card (12/24VDC, 230 VAC), Contact -1CO/2CO, Protection - Freewheeling Diode /Across Relays
	Voltage : 12/24 VDC , 230 V AC
	Contact : 1CO/2CO
	Protection : Freewheeling Diode Across relay
	Indication : Red LED
	Mounting : Din 35 Carrier Rail
	Jumper are provided for selection between positive / nagetive looping.
	Download Catalog

5 Chanel Relay Card

	PROCOM Manufactured wide range of Relay Card (12/24VDC, 230 VAC), Contact -1CO/2CO, Protection - Freewheeling Diode /Across Relays
	Voltage : 12/24 VDC , 230 V AC
	Contact : 1CO/2CO
	Protection : Freewheeling Diode Across relay
	Indication : Red LED
	Mounting : Din 35 Carrier Rail
	Jumper are provided for selection between positive / nagetive looping.
	Download Catalog

8 chanel Relay Card

	PROCOM Manufactured wide range of Relay Card (12/24VDC, 230 VAC), Contact -1CO/2CO, Protection - Freewheeling Diode /Across Relays
	Voltage : 12/24 VDC , 230 V AC
	Contact : 1CO/2CO
	Protection : Freewheeling Diode Across relay
	Indication : Red LED
	Mounting : Din 35 Carrier Rail
	Jumper are provided for selection between positive / nagetive looping.
	Download Catalog

ECON-F

	Engine controller suitabe for Control & Protection of Engine used in non DG application such as Fire Engine, Bus AC, Pump Engine etc..
	Measure RPM, either from MPU or from pulse output of charging alternate.
	Engine Measurement : Protection - Lube oil pressure ,high water temperature ,oil temperature, Emergency off, Low fuel, charging alt/V belt failure.
	Measurement Display -Fuel in %, Oil Pressure, Water temperature, Fuel Level, RPM, Run hour, Battery voltage, service due hour.
	Digital Input - Remote start, Remote stop, Oil temp, Low fuel ,High water temp,Oil pressure.
	In critical operation it is possible to disable or debar tripping of engine via an external digital input.
	128x64 pixel graphical display enhance convenience in configuration of controller.
	Download Catalog

ECON-FC

Protection	Low lube oil pressure(LLOP), High water temp. (HWT) fuel level , Emergency off, Compressors pressure, Compressors temp, Charging alternator fail/V-Belt failure.
Measurement	Battery voltage engine run hour RPM, Compressors pressure in bar, Water temp in degree centigrade, Compressors temp in degree centigrade, Fuel level in %, Service hour.
Digital Output	Start/Crank (battery negative), Charging alternator (battery positive), Solenoid (battery negative), Hooter (battery negative).
Digital Input	Fuel sensor,LLOP sensor, HWT sensor, Compressor temp sensor, Compressor pressure sensor, LLOP switch, HWT switch, LOW FUEL Switch, Compressor temp switch, Compressor Pressure switch, Emergency off, Protection debar, Remote start/stop.
	ECON provide choice of Varity of sensor selection from predefined selection chart
	In critical operation it is possible to disable or debar tripping of engine via an external digital input.
	128x64 pixel graphical display enhance convenience in configuration of controller.
	Download Catalog

ECON-T

Protection / Supervision	Under/Over Voltage/Frequency, Current Unbalance, Over Speed, Overload, RWL, LLOP, HWT, LFL, Charging Alternator/V-belt, Emergency off, Service Due, Fail To Start(only when configured as AMF controllers), Fail To Stop(only when configured as AMF controllers)
Digital Input	7 digital (3 fixed, 4 programmable)
Analog Input	Three Analog input (sensor measurement)
AMF Operation	9 outputs (Six fixed and three programmable)
Modes	Configurable Auto, Semi auto, Manual and Test mode of operation
Fault Data Recording	Last 64 fault with date and time stamping
Event Recording, Display Diagnostics	Last 64 event with date and time stamping, up to 10 running P Codes shall be display
	Download Catalog

❮❮❮ ❯❯❯